Setup for Polling Transmit with Secure Code
When you set POLLING:SECURE to on, anyone who polls your MFC must enter the polling ID
number.
1
Place document face up in feeder, or face down on the glass platen.
2
Press Menu, 1, 3, 7. The screen displays
3
Press
or
to choose SECURE.
4
Enter a four-digit number, and press Set.
5
Press 1 if you want to select additional settings. The display returns to the SETUP SEND menu
—OR— Press 2 if you are finished choosing settings and go to Step 6.
6
Press Start and wait for the fax to be polled.
You can use Secure Polling only with another Brother fax machine.
Cancelling a Job While Scanning the Document
You can cancel a job while you are scanning it into memory by pressing Stop. Eject the document
by pressing Stop again.
Checking Job Status
You can check which jobs are in memory waiting to be sent. Press Menu, 1, 4 to check it. While the
MFC is sending or receiving a fax, press Stop. The screen display job numbers. Press
see them.
POLLING:STANDARD
SELECT { } & SET
Polling
or
to
47