Table of Contents
Advertisement
UK
Check the Front-Roller for any damage when it is received at either the dealer and the final
customer.
Check that the frame construction has not been exposed to impacts.
Check the hydraulic hoses, at hydraulic models, for cuts and squeezing damages. Check also the
other hydraulic components, are not damaged during transport.
The Front-Roller is a hydraulic foldable model as a 2-section construction.
The machine can be delivered with 11 different ring options.
The machine is delivered as a front mounted model, and some optional accessories are available.
Additional Equipment:
• Frontharrow with spindle adjustment and 12x45 mm tines
• Spring-Board 10x80 mm tines, with mechanical adjustment of hight and hydraulic
adjustment of tine angel
• Travers locking system with individual on- and of mounting without tolls
• LED-light bar
• 2 stk. reflex boards
• Stabilization equipment
• Edge equipment
• Easy Change tines for quick replacement
• Top-Cutter
The area must be dry and firm to achieve the best result. Drive around wet spots where the machine
sinks and works unintentionally.
The speed to be driven should be between 6 - 10 km / h. For solid stones, the speed must be reduced
and possibly lift the machine.
Avoid driving over deep tracks in the field that are perpendicular to the direction of travel, with the
Front-Roller lowered.
The tractor's lift arms must always be in the float position while driving.
The machine support legs must always be used when the machine is disconnected. The machine
can stand without support legs but is unstable and can tip over with a slight impact.
Front-Roller 3,0m foldable
Delivery Check
Machine description
Working with the Front-Roller
4
06-10-2021
Back to the table of contents
Advertisement
Table of Contents
