Introduction; Features - A&D AND TM-2657P Instruction Manual

This device conforms to the European Directive 93/42/EEC for Medical Products. This is
evidenced by the CE mark of conformity accompanied by the reference number of a designated
authority.
This device is a blood pressure monitor that measures systolic and diastolic blood pressure and
pulse rate for diagnosis and checkup. The intended users are general adults, or 13 and older, with
common knowledge about blood pressure measurement, who can perform a measurement on
either their right or left arm.
This device is designed to be used at outpatient clinics of general hospitals. It can also be used at
health facilities, fitness gyms and other public facilities for blood pressure management of the
visitors.
Notes
Do not attempt to evaluate the blood pressure measurement results. Always consult with a doctor
for evaluation of the results and treatment, especially when the results are greatly different from your
ordinary values. Self-diagnosis and self-treatment from such results can be dangerous.
Do not attempt to use this device on newborns or infants. Using this device on small children
could cause injury to them. This device is designed for measuring adults.
Facilities with the device installed should employ at least one person who has good knowledge of
blood pressure measurement and can give advice to users about how to pose for measurement or
general information about blood pressure. The person should also have basic knowledge about
maintenance of the monitor and know procedures to request training for maintenance if necessary.
Measurement can be performed using either the right or left arm.
The arm cuff is inflated around the arm by pressing the START/STOP button and deflation
speed is automatically controlled. No special adjustment is required. All you have to do is insert
your arm into the arm insertion section to the shoulder and press the START/STOP button. The
rest of the procedure is done automatically for a quick and easy measurement of blood
pressure.
The printer is equipped with a cutter to automatically cut the printed paper.
An optional external input/output unit can be connected to a computer for data management or
automation as necessary.
.

INTRODUCTION

1.

FEATURES

2.
3