Transmission Speed (Mini-Din); Transmission Speed (D-Sub); Stop Bit (Mini-Din); Stop Bit (D-Sub) - A&D AND TM-2657P Instruction Manual

10.13. Transmission speed (Mini-DIN)

The Mini-DIN transmission speed can be set using the function
Use the ▲ button to change the setting. This setting appears in the diastolic display section.
DIA LED
1200 bps
2400 bps
4800 bps
9600 bps

10.14. Transmission speed (D-Sub)

The D-Sub transmission speed can be set using the function
Use the ▲ button to change the setting. This setting appears in the diastolic display section.
DIA LED
1200 bps
2400 bps
4800 bps
9600 bps

10.15. Stop bit (Mini-DIN)

The stop bit ( Mini-DIN
Use the ▲ button to change the setting. This setting appears in the diastolic display section.
DIA LED
Stop bit 1
Stop bit 2

10.16. Stop bit (D-Sub)

The stop bit ( D-Sub
Use the ▲ button to change the setting. This setting appears in the diastolic display section.
DIA LED
Stop bit 1
Stop bit 2

10.17. Blood pressure result output

The blood pressure result output can be set using the function
Use the ▲ button to change the setting. This setting appears in the diastolic display section.
DIA LED
RB (no ID, immediately after measurement) + STD
RI (with ID, immediately after measurement) + STD
BP (with ID, immediately after measurement) only
STD (command response) only
RA (with ID, immediately after measurement)
For details on transmission printing, contact the local A&D dealer.
Transmission speed (Mini-DIN)
Transmission speed (D-Sub)
) can be set using the function
Stop bit (Mini-DIN)
) can be set using the function
Stop bit (D-Sub)
Blood pressure result output
F21
F22
F23
.
F24
.
F25
.
29
.
Default
.
Default
Default
Default
Default