Sending Bitmaps - A&D AND TM-2657P Instruction Manual

15.2. Sending bitmaps

1. Switch off the power of the monitor.
2. With the COUNT, ▲ and SELECT buttons pressed, switch the power on. The monitor
enters the bitmap transfer mode.
3. Insert the SD card containing the bitmap file (Logo.bmp) saved in "15.1. Size of original
bitmap patterns" into the SD socket. Press the START/STOP button to start data transfer.
After transfer, restart the power, and then set the function
with the blood pressure value after blood pressure measurement.
Bitmap SD socket cover
F15
to
57
2
. The bitmap is printed