Periodic Inspection - A&D AND TM-2657P Instruction Manual

12.3. Periodic inspection

To ensure correct use of the monitor, perform a periodic inspection.
The main items of the periodic inspection are as follows.
Before switching the power on
Item
Exterior
Operation parts
Display
Measurement
parts
Arm cuff cover
Printer
Power parts
After switching the power on
Item
Exterior
Operation parts
Display
Printer
Backup function
Check for deformations and damage from drops.
Check parts for dirt, rust, scratches.
Check panels for dirt, scratches, damage.
Check for moisture.
Check switches and buttons for damage, looseness.
Check display for dirt, scratches.
Check the cuff and arm cuff cover for damage.
Check that the arm cuff cover is installed.
Please use the arm cuff cover to prevent any foreign matter from
entering into this device.
Check that the printer paper is the specified type
Check that the power cable is inserted correctly into the connector.
Check the power cable for damage
(exposed core wires, disconnection).
Check that the electrical outlet is properly grounded and supplies the
specified voltage and frequency (100-240 V~ 50-60 Hz).
Check for smoke or unusual smells.
Check for unusual noise.
Press the START/STOP button and check for errors.
Press the FAST STOP button during inflation to check that pressurization
stops.
Check the blood pressure, pulse and clock display sections for missing
numbers or characters.
Check that no error codes are displayed.
Check that measurement values are near normal values.
Check that the paper availability and run out are detected.
Check that the printer paper is fed correctly.
Check that test printing has no missing items.
Check that the paper is cut after printing.
Check that the date and time are correct.
Check that the contents of set values are saved.
Description
Details
46