Display Time; Applied Pressure; Ihb - A&D AND TM-2657P Instruction Manual

10.2. Display time

The display time for measurement results can be set using the function
Use the ▲ button to change the setting. This setting appears in the diastolic display section.
DIA LED
No display of results (All values are displayed as "---")
5 seconds
10 seconds
20 seconds
Remains displayed

10.3. Applied pressure

The applied pressure can be set using the function
Use the ▲ button to change the setting. This setting appears in the diastolic display section. (If
automatic applied pressure (
applied pressure value is automatically determined.)
DIA LED
Automatic applied pressure
160 mmHg
180 mmHg
200 mmHg

10.4. IHB

The IHB setting can be set using the function
Use the ▲ button to change the setting. This setting appears in the diastolic display section.
DIA LED
IHB off
IHB on
When IHB is on:
Printing example
When IHB is detected
For details on IHB, see "3. ABBREVIATIONS AND SYMBOLS".
Display time setting
Aut
) is set, pulsation is observed while pressure is applied and the
Applied pressure setting
F05
IHB setting
When IHB is not detected
23
F03
.
.
F02
.
Default
Default
Default