10.5. Print quality
The print quality can be set using the function
Use the ▲ button to change the setting. This setting appears in the diastolic display section.
DIA LED
Printing off
Light printing (high speed)
Standard printing
Dark high-quality printing (low speed)
10.6. ID and name printing
ID printing can be set using the function
Use the ▲ button to change the setting. This setting appears in the diastolic display section.
(Only TM-2657VP,TM-2657P)
DIA LED
ID : No
ID : No
ID : Yes
ID : Yes
When ID and name printing is on:
Printing example
To input an ID, set the function
The ID data is maintained until the blood pressure is measured correctly and is cleared
immediately after the result is displayed or printed.
F07
Print quality setting
F08
.
ID printing setting
/ Name : No
/ Name : Yes
/ Name : No
/ Name : Yes
F20
3
to
, and connect an ID reader.
24
.
ID
Name
Default
Default