Bluetooth Connection Timing - A&D AND TM-2657P Instruction Manual

Printing example ）
Bar code printing (CODE39)
Printing example ）
Bar code printing
( CODE39 , with check digit (modulus43 ) )
※ For details on ICT printing, contact your local A&D dealer.
※ QR code is a registered trademark of DENSO WAVE Incorporated.

10.21. Bluetooth connection timing

The Bluetooth connection timing can be set using the function F31. Use the ▲ button to change
the setting. This setting appears in the diastolic display section.
DIA LED
Connect at the end of measurement
Connect at the start of measurement
＜Connect at the end of measurement＞
Connect with the host device after each measurement and start Bluetooth transmission.
＜Connect at the start of measurement＞
Connect with the host device at the start of each measurement and start Bluetooth
transmission.
Printing example ）
QR code printing, including ID
Printing example ）
QR code printing V2 , including ID
ICT printing
31
Default