Chapter 2 Product Overview
2.6 Operating Bending Section
2.6.1 Operating the Bending Section
<Up-down Angulation Knob>
Turn the up-down angulation knob in the direction of U
to angulate the bending section upward.
Turn it in the direction of D
section downward.
40
Do not forcibly twist or bend too sharply the insertion tube and the
bending section by hand. It may cause a failure.
The bending section is operated by using up-down/left-right angulation knobs.
to angulate the bending
CAUTION
D
D
U
U
202B1262871D