FujiFilm EG-580UR Operation Manual page 97

<Electromagnetic Compatibility (EMC) Information>
202B1262871D
This product is intended for use in the electromagnetic environments specified below.
The customer or the user of this product should assure that it is used in such an environment.
Electromagnetic emission compliance information and guidance
Emission standard
RF emissions
EN 55011
Radiated emissions
EN 55011
Harmonic emissions
EN 61000-3-2
Voltage fluctuations/
flicker emissions
EN 61000-3-3
[Note] Use in combination with the VP-4450HD processor, XL-4450 light source and SU-1
ultrasonic processor.
Compliance
This product uses RF (Radio Frequency) energy
only for its internal function. Therefore, its RF
Group I
emissions are very low and are not likely to cause
any interference in nearby electric equipment.
This product is intended for use in medical
Class A
facilities and commercial facilities.
If this product is used in domestic establishments,
Class A
electromagnetic interference may occur on any
equipments.
In this case, it is recommended to use this product
Applicable
according to "Chapter 1 Safety".
Main Specification
Guidance
97