Specifying Report Settings; Send Tx Report - Canon Color imageRUNNER C2880i Sending And Facsimile Manual

Specifying Report Settings

You can specify how various reports are printed.
NOTE

Send TX Report

The Send TX Report enables you to check whether documents were sent correctly
to their intended destinations. A Send TX Report can be printed automatically after
the documents are sent. You can also set the machine to print a Send TX Report
only when a transmission error occurs, and adjust the Send TX Report setting to
print the first part of the document as part of the report to remind you of the
document's contents.
NOTE
•
•
•
1
12
12-4

Specifying Report Settings

The reports can be printed only if 11" x 17", LGL, LTR, or LTRR paper (plain, recycled, or
color paper) is loaded in the paper sources whose settings in Other in Drawer Eligibility
For APS/ADS in Common Settings (from the Additional Functions screen) are set to 'On'.
(See Chapter 4, "Customizing Settings," in the Reference Guide.)
The results of e-mail, I-fax, file server, and User Inbox transmissions can be printed.
If the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is installed, the
results of fax transmissions are included in the Send TX Report. In addition, a Fax TX
Report is printed with the Send TX Report. (See "Fax TX Report/Fax Error TX Report,"
on p. 14-5.)
For an example of a Send TX Report, see "Send TX Report," on p. 14-3.
(Additional Functions) ➞ [Report Settings] ➞ [Send]
Press
under <Settings> ➞ [TX Report].