Canon Color imageRUNNER C2880i Sending And Facsimile Manual page 83

2
Press the Protocol drop-down list ➞ select [Windows (SMB)].
3
Press [Browse].
IMPORTANT
After turning the main power ON, you must wait for the time set in Startup Time
Settings to elapse before pressing [Browse]. Network transmission is not possible
until this startup time has elapsed. (See Chapter 3, "Using a TCP/IP Network," in
the Network Guide.)
4
Select the desired workgroup ➞ press [Down].
You can also select the workgroup from a list of Active Directory server domain
names that are registered in the machine by pressing [Directory] from the
drop-down list.
● If you want to register a Directory server domain name:
❑
Press [Register].
❑
Enter a domain name ➞ press [OK].
Specifying Destinations Using the New Address Tab
2
2-15