Canon Color imageRUNNER C2880i Sending And Facsimile Manual page 328

2
11
11-8
Communications Settings
Specify each setting ➞ press [OK].
<Send Start Speed>:
Press the Send Start Speed drop-down list ➞ select the desired start speed.
If your document transmission is slow in starting, this may mean that the
telephone lines in your area are in poor condition. Select a slower speed. You
can select [33600 bps], [14400 bps], [9600 bps], [7200 bps], [4800 bps], or
[2400 bps].
<Receive Start Speed>:
Press the Receive Start Speed drop-down list ➞ select the desired start speed.
If your document reception is slow in starting, this may mean that the telephone
lines in your area are in poor condition. Select a slower speed. You can select
[33600 bps], [14400 bps], [9600 bps], [7200 bps], [4800 bps], or [2400 bps].
<Receive Password>:
Press [Settings] ➞ enter [Password] and [Confirm] using
, and .
Press [Space] to insert a space.
Press [Backspace] to delete the last digit that you entered.
IMPORTANT
Priority is given to a subaddress password if the received document is set with a
subaddress, even if a receive password is set.
NOTE
•
If Use Asterisks to Enter Access No./Passwords in System Settings (from the
Additional Functions screen) is set to 'Off', the password that you entered is not
displayed as asterisks. (See Chapter 6, "System Manager Settings," in the
Reference Guide.)
•
For instructions on setting a PIN Code, see "Using a PIN Code," on p. 7-5.
- (numeric keys),