Different Size Originals - Canon Color imageRUNNER C2880i Sending And Facsimile Manual

Different Size Originals

This mode enables you to copy (scan) different size originals with the same widths
(11" x 17" and LTR, or LTRR and STMT) or different widths (11" x 17" and STMT, or
LTR and LGL), together as one group by setting them in the feeder.
IMPORTANT
•
The Different Size Originals mode cannot be used with the Document Size Select (Other
Size or Long Strip Original), 2-Page Separation, Original Frame Erase, or Book Frame
Erase mode.
•
The Different Size Originals mode cannot be used when sending a fax document in the
3
Direct Sending or Manual Sending mode.
•
If Document Size Select setting is set to anything other than [Auto], all of the originals are
scanned in the specified size. If you want to scan the originals in their original sizes,
make sure to set Document Size Select to [Auto].
•
If the originals are placed in the feeder, make sure that the different size originals are of
the same weight (paper type).
•
Align the top edge of the originals with the back edge of the feeder if you are placing
originals with different widths. ("Width" refers to the vertical measurement of the paper
from the front of the machine to the back of the machine when the paper is placed in the
feeder or on the platen glass.)
•
If you send different sized originals via fax, the paper size used to output the faxes on the
recipient's machine is the size of the largest document you sent. For example, if you send
an LTR and 11" x 17" original via fax, they will both be output on 11" x 17" paper at the
recipient's machine.
•
If the originals are placed in the feeder, set differently size originals in the following
combinations. Other combinations may damage the originals.
- 11" x 17" and LGL, LTR and LGL, LTR and LTRR
•
If you place originals with different widths into the feeder, the originals may move slightly
when fed to the platen glass. As a result, the images may be scanned and copied as
slanted.
•
If the Different Size Originals mode is set, the scanning speed may be slower than
normal.
NOTE
To cancel this setting, press [Different Size Originals] ➞ [Cancel].
3-6
Scan Settings