Sending An I-Fax - Canon Color imageRUNNER C2880i Sending And Facsimile Manual

Sending an I-Fax

You can scan a document and send it to a destination via the Internet as an I-fax.
An I-fax can only be sent to machines that can receive faxes via the Internet. You
can add the document's name, a subject line, message body text, and reply-to
address.
IMPORTANT
If you are using Microsoft Exchange Server 5.5, 2000, or 2003, a sending error may
occur when you send an I-fax in the following cases:
- When a user is logged in to the machine using SDL or the Local Device Authentication
- When <SMTP authentication (SMTP AUTH)> for <Authent./Encryption> in E-mail/I-Fax
In these cases, you should add the user logged in to the machine using SDL or the Local
5
Device Authentication system of SSO to [Send on behalf of] in <Delivery Options> in
Exchange General in Exchange. For more information, contact your system
administrator.
1
2
5-8
Sending Methods
system of SSO
in Network Settings in System Settings (from the Additional Functions screen) is set
to 'On'
Place your originals ➞ specify the I-fax destination ➞ press
[Send Settings].
Specify each setting ➞ press [Done].
[Send Doc. Name]:
Press [Send Doc. Name] ➞ enter a document name ➞ press [OK].
[Subject]:
Press [Subject] ➞ enter a subject of your I-fax ➞ press [OK].
[Message]:
Press [Message] ➞ enter a message body text ➞ press [OK].