Specifying Report Settings; Tx Report - Canon ImageRUNNER 2830 Facsimile Manual

Specifying Report Settings

You can specify how various reports are printed.
NOTE
Reports can be printed only if 11" x 17", LGL, LTR, or LTRR paper (plain, recycled, or
color paper) is loaded in the paper sources whose settings in Fax in Drawer Eligibility For
APS/ADS in Common Settings (from the Additional Functions screen) are set to 'On'.
(See Chapter 4, "Customizing Settings," in the Reference Guide.)

TX Report

The TX Report enables you to check whether documents were sent correctly to
their intended destinations. A TX Report can be printed automatically after the
documents are sent. You can also set the machine to print a TX Report only when a
transmission error occurs, and adjust the TX Report setting to print the first part of
the document as part of the report to remind you of the document's contents.
NOTE
•
For more information on the TX Report, see "TX Report/Error TX Report," on p. 9-2.
•
The default settings are:

- TX Report:

- Report With TX Image:
1
Press
For Error Only
On
(Additional Functions) ➞ [Report Settings].

Specifying Report Settings

7
7-3