Activity Report - Canon Color imageRUNNER C2880i Sending And Facsimile Manual

2
Select [For Error Only], [On], or [Off].
● If you select [For Error Only] or [On]:
❑
Select [On] or [Off] for <Report with TX Image>.
<Report with TX Image>:
[On]: Part of the sent document is printed on the Send TX Report.
[Off]: The contents of the sent document are not printed on the Send TX
❑
Select [On] or [Off] for <Report with Color TX Image> ➞ press [OK].
<Report with Color TX Image>:
[On]: Color documents are printed on the Send TX Report.
[Off]: Color documents are not printed on the Send TX Report.
[Report with Color TX Image] can only be set if [Report with TX Image] is set to
'On'.
NOTE
Even if <Report with TX Image> is set to 'On', the original will not be printed in the
following cases:
- If the first page of the original is color, and <Report with Color TX Image> is set to
'Off'
- If the document was sent using the Encrypted PDF mode
● If you select [Off]:
❑
Press [OK].
The Send TX Report is not printed.

Activity Report

The Activity Report is a printed log that shows the results of send and receive jobs.
The Activity Report can be printed at a specified time or it can be printed
automatically when the number of send and receive transmissions reaches 100.
The send and receive logs can also be printed separately.
An Activity Report can be printed manually from the System Monitor screen. (See
"Printing the Send Job Status/Log," on p. 8-8, and "Printing the Receive Job Log,"
on p. 8-13.)
Report.
Specifying Report Settings
12
12-5