Canon Color imageRUNNER C2880i Sending And Facsimile Manual page 348

11
9
10
11-28
Forwarding Settings
❑
If necessary, repeat this step for the other drop-down list(s).
If you want to change the criteria for the forwarding conditions without
changing the forwarding condition for the Fax Number, Subaddress, and
Password drop-down lists, press [Set.] next to the criteria you want to change
➞ enter the new criteria ➞ press [OK].
If you select password as the forwarding conditions, press [Set.] ➞
[Password] ➞ enter a password using
[Confirm] ➞ re-enter the password for confirmation ➞ press [OK].
You can enter up to 20 characters for the Fax Number, Subaddress, or
Password forwarding criteria. The characters that can be entered are:
•
Fax Number: 0 to 9, [Space], [+]
•
Subaddress: 0 to 9,
•
Password:
0 to 9,
NOTE
•
If [disregarded] or [does not exist] is selected as the forwarding condition, you
cannot enter any criteria.
•
You cannot set the following combinations of conditions.
Fax Number
[disregarded]
Other than [disregarded]
Other than [disregarded]
Other than [disregarded]
•
If Use Asterisks to Enter Access No./Passwords in System Settings (from the
Additional Functions screen) is set to 'Off', the password is not displayed as
asterisks on Password screen, and you do not have to re-enter the password for
confirmation. (See Chapter 6, "System Manager Settings," in the Reference
Guide.)
Press [Done].
Press [Forwarding Destination] ➞ select [Address Book] or
[Conf. Fax Inbox].
Details of each item are shown below.
[Address Book]: Select to forward the received document to another machine
(relay function).
[Conf. Fax Inbox]: Select to store the received document in a Confidential Fax
Inbox.
- (numeric keys),
, , [Space]
, , [Space]
Subaddress
[does not exist]
[equals]
[does not exist]
[equals]
, and . Press
Password
[equals]
[equals]
[equals]
[does not exist]