Flow Of Sending Operations - Canon Color imageRUNNER C2880i Sending And Facsimile Manual

Flow of Sending Operations

1
This section describes the flow of basic sending operations.
NOTE
•
Before using the Send function, it is useful to read the following topics:
- Main power and control panel power (See Chapter 1, "Before You Start Using This
- For instructions on entering characters using the keys displayed on the touch panel
- Routine maintenance (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
•
The maximum number of send jobs that the machine can handle is 120, including jobs
with error codes. Among these, 64 fax jobs can be handled. However, the actual number
of send jobs that the machine can handle may be less than 120, depending on the
following conditions:
- Multiple documents are being sent at the same time
- Large documents are being sent
•
You can print a report that contains the results of all send jobs. (See "Send TX Report,"
on p. 12-4.)
•
If you are using a login service, it is necessary to log in to the machine with the
appropriate procedure for the login service you are using.
- If you are using the optional Card Reader-C1 to perform Department ID Management,
- If you are using Department ID Management, see Chapter 2, "Basic Operations," in the
- If you are using the SDL or SSO login service, see Chapter 2, "Basic Operations," in the
1-20

Flow of Sending Operations

Machine," in the Reference Guide.)
display, see Chapter 2, "Basic Operations," in the Reference Guide.
see Chapter 3, "Optional Equipment," in the Reference Guide.
Reference Guide.
Reference Guide.