Canon Color imageRUNNER C2880i Sending And Facsimile Manual page 325

■ Default Subject
The subject that you enter here is used as the default subject whenever you do not enter a
subject when sending a job.
■ Print MDN/DSN on Receipt
Sets whether to print notification e-mail messages that inform you of the successful
delivery of I-fax jobs sent using the Full Mode.
■ Always Send Notice for RX Errors
Sets whether to inform the sender that the e-mail message or I-fax was not received
successfully.
■ Use Send Via Server
Determines whether you can select to send jobs via a server on the screen for specifying
I-fax destination settings. To be able to select 'On' or 'Off' for <Send Via Server> in E-mail/
I-Fax Settings in Communications Settings in System Settings (from the Additional
Function screen), set <Use Send Via Server> and <Allow Not Via Server> to 'On'
beforehand.
■ Allow MDN Not Via Server
Sets whether to allow the recipient machine to send MDN (Mail Delivery Notification) mail
directly to the IP address of the sending machine without going via a mail server.
1
(Additional Functions) ➞ [System Settings] ➞
Press
[Communications Settings] ➞ [E-mail/I-Fax Settings].
2
Specify each setting ➞ press [OK].
<Maximum Data Size for Sending>:
Specify the maximum data size for sending by pressing [-] or [+].
<Full Mode TX Timeout>:
Specify the full mode TX timeout time by pressing [-] or [+].
Communications Settings
11
11-5