Canon Color imageRUNNER C2880i Sending And Facsimile Manual page 133

4
Select the desired mode from the Special Features screen.
5
Set the desired mode.
For more information on setting each mode, see the corresponding section.
To set other modes at the same time, repeat steps 4 and 5.
6
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
•
To cancel this setting, follow the procedure below.
- For modes which have a right triangle ( ) on the bottom right of their key:
Example: Frame Erase
Press [Special Features] ➞ [Frame Erase] ➞ [Cancel].
- For modes which do not have a right triangle ( ) on the bottom right of their key:
Example: Job Build
Press [Special Features] ➞ [Job Build].
To cancel the scan settings, press the Scan Settings drop-down list ➞ press
•
[Option] ➞ [Cancel].
•
If [Preview] on the Send Settings screen is set, you can verify the images from the
Preview screen before sending your document. (See "Previewing Originals," on
p. 5-17.)
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
(Start) once for each original. When scanning
What are Special Features?
4
4-3