PRONAR T780 Translation Of The Original Instructions page 64

DRAWING 5.3A REGULATION OF MAIN BRAKES
(1) expander arm, (2) expander shaft, (3) regulation screw
TABLE 5.1 MAIN BRAKE BRAKING FORCE
Regulation should be conducted separately for each wheel. After proper brake regulation, at
full braking the axle shaft expander arm should create an angle of 90
piston. With properly regulated brakes, trailer main brake braking force should reach a value
not less than that given in table(5.1).
ATTENTION!
Braking force of the trailer, is the braking force of all trailer wheels.
Difference in braking force may not be greater than 30%, considering that 100% constitutes
greater force.
MAIN BRAKE BRAKING FORCE
124.5
5.5
UNIT
kN
°
with pneumatic ram