PRONAR T780 Translation Of The Original Instructions page 20

moving by placing wedges or other objects without sharp edges under the trailer's
wheels.
• People or animals must not be carried.
• The trailer and tractor must not be attached if the hydraulic oil in the two machines is
of different types.
• While connecting the trailer to the tractor, use the appropriate hitch. After linking the
trailer, check the hitch safeguards.
• Be especially careful when attaching the machine.
• When attaching, there must be nobody between the trailer and the tractor.
• Do NOT proceed with disconnecting trailer from the tractor when load box is raised on
telescopic cylinders. Exercise caution when disconnecting trailer.
• Regularly check the condition of connections and safety devices.
• Prior to tipping the load box, place the tipping pins on the intended unloading side.
Check if the pins are correctly inserted and secured.
• . Using third-party pins could damage the trailer.
• The hydraulic system is under high pressure when operating.
• Regularly check the technical condition of the connections and the hydraulic and
pneumatic leads.
• Prior to moving off make sure that tipping pins connecting the lockbox and the lower
frame and the side wall hinge pins are secured against falling out.
• The trailer's maximum carrying capacity must not be exceeded.
• Load must be uniformly distributed and it must not obstruct visibility or hinder driving.
• Loading and unloading work should be carried out by someone experienced in this
type of work.
• When unloading, tractor and trailer must be positioned to drive forward.
• Do NOT drive with an load box raised.
• Ensure that during unloading nobody is near tipped load box.
2.3