Table of Contents
Advertisement
Trailer greasing should be performed with the aid of a manually or foot operated grease gun,
filled with generally available permanent grease. Absorber plates should be lubricated using
an agent having both anticorrosion and lubricating properties, it is recommended to apply on
outer surfaces very thin layer of grease. For this purpose, silicone spray (for lubricating of
guides, lock etc see table) can be used.
After greasing the trailer according to instructions, wipe off excess grease. Changing grease
in wheel hub axle bearings should be entrusted to professional service.
During trailer use the user is obliged to observe greasing instructions according to
attached schedule. Excess greasing substance causes depositing additional
contaminants in places requiring greasing, therefore it is essential to keep individual
machine elements clean.
5.7 INSTALLATION AND DISASSEMBLY OF THE FRAME AND
CANVAS COVER
Canvas cover can only be used together with the frame and fenced platform. Fenced
platform is located on the trailer's front wall. It provides convenient and safe location for work
associated with canvas cover. The canvas cover should be rolled up and unrolled while
standing on the fenced platform. Be especially careful when on the fence platform. Stand
firmly and hold the railing with one hand. Secure the cover using belts.
The frame's of structure comprises front and rear stakes as well as connecting pipe.
Installation of the frame and canvas cover should be conducted as follows:
• Attach stakes to wall extensions,
• Screw the pipe to stakes,
• Put the canvas cover on the right side and rest it on the limiters,
• Unroll the canvas cover and attach belts to appropriate wall extension lugs.
Disassembly of the frame and canvas cover should be performed in reverse order.
5.15
Advertisement
Table of Contents
