Setting Your Fax As A Relay Unit - Canon FAX-L800 User Manual

Follow the procedures in this section to set up your fax as a relay unit. When
your fax is the relay unit, it receives the document from the originator and relays
it to several other destinations.

Setting Your Fax as a Relay Unit

Follow this procedure to set your fax to participate in a relay network as a relay
unit.
1. Open the RELAY TX GROUP menu.
DATA REGISTRATION
SET
SET
SET
Chapter 9
Ask the originator if they would like to receive a report of successful
transmission after your fax relays the document.
Make sure the relay feature on your fax is turned on.
Open both One-touch Speed Dialling panels and press DATA
REGISTRATION.
REGISTRATION
1.DATA REGISTRATION
Press SET.
DATA REGISTRATION
1.USER SETTINGS
Press the search buttons until you see the display below.
DATA REGISTRATION
6.FILE SETTINGS
Press SET.
FILE SETTINGS
1.CONFID. MAILBOX
Press the search buttons until you see the display below.
FILE SETTINGS
2.RELAY TX GROUP
Press SET.
RELAY TX GROUP
1.SETUP FILE
Using a Relay Network 9-3