6. You can now clean the scanning glass. (Q15-22)
Closing the Operation Panel
1. Lower the operation panel until the plastic loop is even with the stub on the
2. Place the end of the plastic loop over the end of the stub so it locks in place.
3. Close the operation panel and press down on it slightly until you hear it lock
4. Re-attach the document tray you removed earlier.
5. Connect the power cord of the fax unit at the power source.
Chapter 15
-or-
Re-fill the stamp pad. (Q15-23)
fax machine.
in place.
Maintenance & Frequently Asked Questions
15-21