11. Press STOP to return to standby.
Returning to the Full Power Mode
The display tells you the fax has entered the energy save mode with this message:
The indicator under the energy saver button to the right of the LCD display will
ENERGY SAVER
also light red.
To restore the full power mode, press the ENERGY SAVER button. While the
fax machine is powering up, PLEASE WAIT is displayed for a few moments.
While the fax unit is powering up, you can perform any operation.
The following actions will automatically restore the full power mode:
You can awaken the fax from the low-energy sleep mode by:
Chapter 3
After the fax machine enters the energy saver mode, only the energy saver
indicator on the operation panel remains on and the LCD display shows:
ENERGY SAVER
ENERGY SAVER
PLEASE WAIT
Receiving a document.
Printing an Activity Management report pre-set for printing.
Answering a call.
Pressing the ENERGY SAVER button.
Setting a document on the fax for sending or copying.
Getting Started
3-21