Changing The Transfer Settings - Canon FAX-L800 User Manual

Changing the Transfer Settings

Follow this procedure to change settings in the transfer setup file.
1. Open the TRANSFER menu. (Q7-12)
2. Press the search buttons until you see the display below.
SET
3. Press SET.
4. Use the buttons on the numeric keypad to enter the four-digit password
SET
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
9
7 8
0
5. Press the search buttons to display the desired setting.
SET
6. With the setting you want to change on the display, press SET.
7. To change the settings, follow the same procedures you used to set up the
To delete any settings, press CLEAR and press SET.
8. Press STOP to return to standby.
7-16 Receiving Documents
TRANSFER
1.SETUP FILE
TRANSFER
2.CHANGE DATA
CHANGE DATA
PASSWORD
If you have not set the password, you can skip the next step.
protecting the transfer setup file. Then press SET.
CHANGE DATA
1.FILE NAME
CHANGE DATA
6.PRINT RX DOC.
transfer setup file. (Q7-12)
Chapter 7