Canon FAX-L800 User Manual page 116

1. Set the document on the fax. (Q6-3)
2. Press DIRECT TX.
DIRECT TX
3. Dial the other party's fax number.
ABC DEF
1 2 3
GHI JKL MNO
4
5 6
PQRS TUV WXYZ
9
7 8
0
4. Press START/SCAN.
5. Press DIRECT TX to turn off the direct sending mode.
DIRECT TX
6-14 Sending Documents
Although direct sending is slower than memory sending, you can use direct
sending when you need to send an urgent document ahead of other
documents stored in the memory.
You can also use direct sending when the memory is full and there is no space
to hold another document in memory.
Set the document resolution, contrast, and document type. (Q6-4)
You can also select a sender's name with the TTI SELECTOR. (Q6-6)
The DIRECT TX lamp lights. The fax is now in the direct sending mode.
Use the buttons on the numeric keypad to dial the number. (Q6-7)
-or-
Press a One-touch Speed Dialling button to dial the number. (Q4-26)
-or-
Press CODED DIAL and a three-digit code to dial the number. (Q4-28)
-or-
Press DIRECTORY and search for the name to dial the number. (Q4-31)
If you make a mistake during dialling, press STOP to return to standby and
start again.
The fax dials the other party's number and sends the fax. Each page is sent as
it is scanned.
A series of messages report the other party's name, telephone number, and
transaction number in the LCD display. The final message reports successful
transmission.
26/12 '97 FRI 12:05
TRANSMITTING OK
Chapter 6