Table of Contents
Advertisement
12. Turn ECM off or on.
SET
ECM (error correction mode) reduces system and line errors during sending or
receiving with another fax that supports ECM. Otherwise, this setting is ignored.
If transmission speed appears to be extremely slow, you may be able to speed up
transmission time by turning ECM off.
SET
13. After you register a number for One-touch Speed Dialling, make sure you
Chapter 4
Press SET.
ECM
Press the search buttons to display OFF or ON.
Press SET.
1-TOUCH SPD DIAL
11=
This completes all settings for telephone registration of a One-touch Speed
Dialling button.
If you want to set up other buttons, repeat from step 2.
-or-
Press STOP to return to standby.
write the name of the other party on a destination label and stick it on the
One-touch Speed Dialling panel above the number of the One-touch Speed
Dialling button where the number is registered.
ON
Setting Up and Using Speed Dialling
4-13
Advertisement
Table of Contents
