Canon FAX-L800 User Manual page 165

Memory Box Setup Summary (Cont'd)
2.# OF RX COPIES
7.TRANSMIT
1.SELECT
LOCATIONS
2.TX DOCUMENT
1.RECEIVED
DOCUMENT
TX REPORT
2.SCAN
DOCUMENT
Chapter 8
01 COPIES
Determines whether to transmit documents from the memory box and
how they are to be transmitted.
NO
YES
Allows you to select the destinations of the documents to be
transmitted from the memory box. Press the appropriate One-touch
button or press the CODED DIAL button followed by the
appropriate three-digit code to enter numbers for dialling.
Determines whether to (1) transmit documents received in the
memory box from another fax or (2) transmit documents scanned into
the memory box.
Sets the memory box to receive documents from other fax units and
transmit them to other destinations.
TRANSMIT
NOT TRANSMIT Documents received in the memory box can not
If you turn on TRANSMIT for RECEIVED DOCUMENT, you can
set the memory box to send a transaction report to the originator
every time it sends a received document to another destination. This
setting is effective only when 6.RECEIVE – 1.SELECT ORIG UNIT
is ON.
TRANSMIT
NOT TRANSMIT A transaction report for the transmission is not
Determines whether to transmit documents scanned in the memory
box.
TRANSMIT
NOT TRANSMIT Documents scanned into the memory box are
If you turn on PRINT RX DOC., use this setting
to specify the number of copies you want to
print (01-99).
Documents are not transmitted from the
memory box.
Documents are transmitted from the memory
box.
Documents received in the memory box can be
transmitted to other destinations.
be transmitted to other destinations.
A transaction report for the transmission is sent
to the originator.
sent to the originator.
Documents scanned into the memory box are
transmitted.
not transmitted.
Using the Memory Features 8-17