Canon FAX-L800 User Manual page 223

PROGRAM button Setup Summary
The default (PRINT REPORT) remains in effect unless you change it.
PRINT REPORT
REPORT
D.T.
TONE
SCANNING MODE
STAMP
Chapter 12
Sets the PROGRAM button to function as a print
transmission report button. Whenever you need a
transmission report for a document you are sending,
just press the PROGRAM button and a transmission
report will print after the document is sent.
Assigns the PROGRAM button the functions of the
REPORT button. Whenever you need to print a
report, all you have to do is press the PROGRAM
button. This saves you the effort of opening both One-
touch Speed Dialling panels to press the REPORT
button.
Sets the PROGRAM button to function like the D.T.
button so you do not have to open both One-touch
Speed Dialling panels to press the D.T. button.
Sets the PROGRAM button to function like TONE
button so you do not have to open both One-touch
Speed Dialling panels to press the TONE button.
Set up the RESOLUTION, CONTRAST, or
DOCUMENT TYPE buttons for sending special
documents and then store the settings under the
PROGRAM button. The next time you need to set
them before a document transmission, you can set them
with a single button press.
If you had the optional stamp feature installed for you,
this feature is available. If you select STAMP you can
turn the stamp feature on and off without opening both
One-touch Speed Dialling panels to press the STAMP
button.
Other Special Features 12-5