Keith McMillen Instruments SoftStep Reference Manual page 63

Hide thumbs Also See for SoftStep:
Table of Contents

Advertisement

 MIDI ポリフォニック・アフタータッチ・メッセージを出力します。ポリ・アフタータッチを選択
Outputs values as MIDI polyphonic aftertouch messages. The following options are available when
   すると、以下のオプションが利用できます。
Poly Aftertouch is selected:
ノート(Note)
Note
 ポリ・アフタータッチ・メッセージと連携するノート・ナンバーを設定します。
Sets the note number to associate with the poly aftertouch message.
チャンネル(Ch)
Ch
ポリ・アフタータッチ・メッセージを送信する MIDI チャンネルを設定します。
Sets the MIDI channel to output the poly aftertouch messages on.
Y インクリメント設定(Y Inc Set)
Y Inc Set
(ホステッド・モードのみ)
 キーの Y インクリメントの値を設定します。モッドラインを通過する値は全て、使用中のキーの
(Hosted mode only)
    Y インクリメントの値を即座に設定します。他のキーやプリセットの切り替えによって Y インクリ
Sets a
key's Y Increment value. Any value going through the modline will instantly set the current
    メントの値を初期化するのに便利です。
key's Y Increment value. Useful for initializing Y Increment values from other keys or preset
changes.
X インクリメント設定(X Inc Set)
X Inc Set
(ホステッド・モードのみ)
 キーの X インクリメントの値を設定します。モッドラインを通過する値は全て、使用中のキーの
(Hosted mode only)
    X インクリメントの値を即座に設定します。他のキーやプリセットの切り替えによって X インクリ
Sets a key's X Increment value.
    メントの値を初期化するのに便利です。
key's X Increment value. Useful for initializing X Increment values from other keys or preset
changes.
Any value going through the modline will instantly set the current
Appendix
63

Advertisement

Table of Contents
loading

Related Products for Keith McMillen Instruments SoftStep

Table of Contents