Keith McMillen Instruments SoftStep Reference Manual page 56

Hide thumbs Also See for SoftStep:
Table of Contents

Advertisement

ロング・トリガー(Long Trig)
Long Trig
 キーを 1 秒間長押しすると、127 の値を出力した直後(100ms 後)に 0 の値を出力します。
Pressing and holding the key for 1 second will output a 127 followed by a 0 (100ms later).
オフ・トリガー(Off Trig)
Off Trig
(ホステッド・モードのみ)
(Hosted mode only)
 キーを離すと、127 の値を出力した直後(100ms 後)に 0 の値を出力します。
Outputs a 127 followed by a 0 (100ms later) when the key is released.
ファースト・トリガー・ラッチ(Fast Trig Latch)
Fast Trig Latch
(ホステッド・モードのみ)
 キーを押すとすぐに 127 の値を出力します。値は 0 に戻りません。
(Hosted mode only)
Immediately outputs a 127 when the key is pressed. Does not go back to 0.
ダブル・トリガー・ラッチ(Dbl Trig Latch)
Dbl Trig Latch
(ホステッド・モードのみ)
 キーを素早く 2 回押すと 127 の値を出力します。値は 0 に戻りません。
(Hosted mode only)
Two quick presses of the key will output a 127. Does not go back to 0.
ロング・トリガー・ラッチ(Long Trig Latch)
(ホステッド・モードのみ)
Long Trig Latch
 キーを 1 秒間長押しすると 127 の値を出力します。値は 0 に戻りません。
(Hosted mode only)
Pressing and holding the key for 1 second will output a 127. Does not go back to 0.
ペダル(Pedal)
 エクスプレッション・ペダルを接続すると、ペダルの設定値に応じた値を出力します。
Pedal
●範囲:0 〜 127
If an expression pedal is connected, this source will output the current value coming from the
pedal.
イニット(Init)
• Range: 0-127
(スタンドアローン・モードのみ)
 プリセットをロードした時に必ず 127 の値を出力します。特定のプリセットをロードした時に値を
Init
    初期化したい場合に便利です。特定の値を送信したい場合は、モッドラインのミニマムとマキシマム
(Standalone mode only)
     (あるいはオフセット)のオプションで設定してください。
Outputs a 127 whenever the current preset is loaded. Useful for initializing values whenever a
speciÞc preset is loaded.
ナブ Y x 10 & キー(Nav Y x 10 & Key)
value.
 ナブ・パッドとの組み合わせで動作します。ナブ・パッドは必ずプログラム・チェンジ・モードか、
Nav Yx10 & Key
    またはナブ Y ディケイド(Nav Y Decade) ・ソースを使用する設定にしておいてください。
 ナブ・パッドのカウント値は "10 の位" すなわち 20、30、40 などの値を入力するために 10 倍され
Works in tandem with the Nav Pad. The Nav Pad must also be in Program Change mode or using
    ます。そして、 (このソースが割り当てられた)キーを押した時に、そのキーの番号が値に加算されます。
the Nav Y Decade source.
The Nav Pad's current counter value is multiplied by 10 to get a "decade" —!e.g. 20s, 30s, 40s, etc.,
then the key number (this source is placed on) is added to the value when pressed.
Use the min and max options (or offset) in the modlines to send a speciÞc
Appendix
56

Advertisement

Table of Contents
loading

Related Products for Keith McMillen Instruments SoftStep

Table of Contents