6.4 HEADER DETACHMENT
Refer to the M150 & M200 Self-Propelled
Windrower Operator's Manual for procedures for
mechanically detaching the header from the self-
propelled windrower.
procedures for disconnecting electrical harness
and hydraulic hoses.
CAUTION
To
prevent
accidental
windrower, shut off engine, engage parking
brake, and remove key.
6.4.1 M200 – 13 FT & 16 FT
a. Move LH (cab forward) platform to rear of
windrower.
PRESSURE
b. Disconnect the two hydraulic couplers from
windrower valve.
Form # 169089
OPERATION
Refer to the following
movement
of
RETURN
FWD VALVE BLOCK
c. If grass seed header is being detached,
disconnect two couplers at the aft valve and the
single coupler at the forward valve.
C
d. Raise lever (A) and undo Velcro straps (B).
e. Move hose bundle (C) to store on header. If
grass seed header is being detached, there are
two hose bundles to store on the header.
f.
Install caps on connectors and hose ends if
equipped.
18
AFT VALVE BLOCK
A
B
(continued next page)
Model Year - 2010