Bevel Gearbox - MacDon R80 Operator's Manual

7.9.9

Bevel Gearbox

The bevel gearbox is located inside the drive
compartment at the left hand side of the header.
If repairs are required, it should be removed and
serviced at your dealer. See 7.9.9.3 Removal –
Bevel Gearbox.
Form # 169089
MAINTENANCE/SERVICE
7.9.9.1
a. Rest header onto blocks so that it is level.
16 FT
b. Open LH drive shield (A).
13 FT
c. Remove plug (B) and verify that the oil slightly
d. Replace plug and tighten.
e. Clean up any spilled oil.
75
Checking Oil
The bevel gearbox oil level should be checked
every 100 hours or once per year:
DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
A
16 FT SHOWN – 13 FT SIMILAR
runs from the hole.
B
Model Year - 2010