Header Detachment; M205 Windrower - MacDon R85 Operator's Manual

6.6 HEADER DETACHMENT

6.6.1

M205 Windrower

a. Lower header to ground. If ground is soft, place
blocks under header.
b. Stop engine and remove key.
c. Move LH (cab forward) platform to rear of
windrower.
A
d. Disconnect electrical harness at connector (A).
e. Disconnect hoses from lines (B), (C), and (D) on
windrower. Install caps and plugs on open lines.
Form # 169455
OPERATION
D
B
C
f. Disconnect hose support (E) from bracket on
windrower lift linkage.
g. Route hoses (F) and electrical harness onto
header.
h. Move maintenance platform to closed position.
i. Detach the header from the windrower. Refer to
the MacDon
Operator's Manual.
21
F
E
Self-Propelled Windrower
Revision A