9 OPTIONS AND
ATTACHMENTS
9.1 GAUGE ROLLER KIT
The gauge roller kit installs at either end of
the cutterbar and the rollers can be adjusted
for varying cutting height. The kit includes
two
roller
assemblies
hardware. It is available only for the 16 foot
header.
9.2 SKID SHOE KIT
The skid shoe kit installs at either end of the
cutterbar and the shoes can be adjusted for
varying cutting height. The kit includes two
skid
shoe
assemblies and
hardware. It is available only for the 16 foot
header.
9.3 SKID PLATE LIFT KIT
The skid plate lift kit consists of spacer
assemblies that attach to the existing skid
plates to increase the ground clearance by
approximately 2 inches (51 mm).
includes four assemblies and attachment
hardware.
Form # 169089
OPTIONS
and
attachment
attachment
The kit
98
9.4 TALL CROP DIVIDER KIT
The tall crop dividers attach to the ends of the
header for clean crop dividing and cutterbar entry
in tall crops.
The kit includes left and right
dividers and attachment hardware.
9.5 CUTTERBAR REPAIR TOOL KIT
The cutterbar repair tool kit contains the
necessary tools for replacement of the cutterbar
idler gears.
Refer to the Technical Service
Manual for instructions.
9.6 DOUBLE WINDROW ATTACHMENT
The double windrow attachment (DWA) can be
attached to the M Series Windrower to enable
double windrowing.
necessary fittings and instructions.
The kit includes all the
Model Year - 2010