Transporting Windrower; Lights - MacDon R80 Operator's Manual

g. Disconnect the two drive couplers, and case
drain coupler on header.
h. Move hose bundle from header and locate on
windrower LH side with hoses in support (D).
i. Rotate lever (A) clockwise and push to engage
bracket.
j. Locate electrical harness through support (D)
and attach cap to electrical connector (E).
k. Move windrower platform back to closed
position.
l. Detach header from windrower.
M150 & M200
Operator's Manual
mechanically detaching the header from the self-
propelled windrower.
Form # 169089
E
A
D
Refer to the
Self-Propelled Windrower
for procedures
OPERATION

6.5 TRANSPORTING WINDROWER

Refer
Windrower Operator's Manual for transporting
headers when attached to the M150/M200
windrower.

6.6 LIGHTS

The turn signal lights
and hazard
which are mounted on
both ends
header, are activated
by switches in the M
Series windrower cab.
Only the 16 ft model
is equipped
lights.
for
20
to M150 & M200
lights,
of the
with
Self-Propelled
Model Year - 2010