M150 - 13 Ft - MacDon R80 Operator's Manual

PRESSURE
CASE DRAIN
g. At the header, disconnect electrical connector by
turning collar counterclockwise and pulling
connector to disengage.
h. Disconnect the two drive couplers, and case
drain coupler on header.
i. Move hose bundle from header and locate on
windrower LH side with hoses in support (D).
j. Rotate lever (A) clockwise and push to engage
bracket.
k. Locate electrical harness through support (D)
and attach cap to electrical connector (E).
l. Move windrower platform back to closed
position.
m. Detach header from windrower.
M150 & M200
Operator's Manual
mechanically detaching the header from the self-
propelled windrower.
Form # 169089
RETURN
ELECTRICAL
E
A
D
Refer to the
Self-Propelled Windrower
for procedures
OPERATION
6.4.2 M150 – 13 FT
a. Move LH (cab forward) platform to rear of
windrower.
b. Disconnect the hydraulic coupler from windrower
valve.
c. Raise lever (A) and undo Velcro straps (B).
d. Move hose (C) to store on header.
e. Install caps on connectors and hose end if
equipped.
f. At the header, disconnect electrical connector by
for
turning collar counterclockwise and pulling
connector to disengage.
19
C
(continued next page)
Model Year - 2010
B
A