Maintenance Schedule; Break-In Inspection - MacDon R80 Operator's Manual

7.12 MAINTENANCE SCHEDULE

The following maintenance schedule lists the
periodic maintenance procedures, organized by
service intervals. Regular maintenance is the
best insurance against early wear and untimely
breakdowns.
increase machine life. For detailed instructions,
refer to the specific headings in Section 7,
Maintenance/Service.
lubricants specified
Recommended Fluids and Lubricants.

7.12.1 Break-In Inspection

HRS
Drive Belts
5
Hardware
25
Drive Belts
Drive Belts
50
Cutterbar Lubricant
Bevel Gearbox Lubricant
Bevel Gearbox Lubricant
150
Cutterbar Lubricant
Form # 169089
MAINTENANCE/SERVICE
Following this schedule will
Use the fluids and
in Section
ITEM
Check Tension.
Check For Loose Hardware. Tighten To Required
Torque.
Check Tension.
Check Tension.
Change. Use Only Specified Amount. Do Not
Overfill.
Change.
Change.
Change. Use Only Specified Amount. Do Not
Overfill.
Service Intervals:
intervals are in hours of operation.
service interval is given in more than one time
frame, e.g. "100 hours or Annually", service the
machine at whichever interval is reached first.
Recommended intervals are for average
conditions. Service the machine more
often if operated under adverse conditions
(severe dust, extra heavy loads, etc.).
7.3.2,
Carefully follow safety messages given
under Section 7.2, Recommended Safety
Procedures.
INSPECTION
91
The recommended service
IMPORTANT
CAUTION
REFER TO SECTION
7.9.3, 7.9.5, and 7.9.8.
7.3.1.
7.9.3, 7.9.5, and 7.9.8.
7.9.3, 7.9.5, and 7.9.8.
7.8.2
7.9.9
7.9.9
7.8.2
Model Year - 2010
Where a