Recommended Lubricants - MacDon R80 Operator's Manual

7.3.2

Recommended Lubricants

x
Your machine can operate at top efficiency
only if clean lubricants are used.
x
Use clean containers
lubricants.
x
Store in an area protected from dust,
moisture, and other contaminants.
LUBRICANT SPEC
SAE Multi-
Purpose
Grease
NLGI 00
Traxon SAE
80W90*
SAE 75W90*
Gear
API Service
Lubricant
Class GL-5
(SAE J2360
Preferred)
* or equivalent
.
Form # 169089
MAINTENANCE/SERVICE
to handle all
DESCRIPTION
High Temp. Extreme Pressure (EP2)
Performance With 1% Max Molybdenum
Disulphide (NLGI Grade 2).
Lithium Base
High Temp. Extreme Pressure (EP)
Performance With 10% Max
Molybdenum Disulphide (NLGI Grade 2).
Lithium Base
Synthetic EP
High Thermal & Oxidation Stability.
API Service Class GL-5
Fully Synthetic Gear Lubricant
Do not overfill the cutterbar when
adding lubricant.
failure of cutterbar components may occur
if overfilled
USE
As
Required
Unless
Otherwise
Specified.
Driveline
Slip-Joints
Conditioner
Gearbox
Cutterbar
Bevel
Gearbox
38
IMPORTANT
Overheating and
CAPACITIES
13 Ft 16 Ft
--
--
Lubricated For Life
16 oz. (0.45 kg)
3.43 qts (U.S.) 4.5 qts (U.S.)
(3.25 liters) (4.25 liters)
0.86 pints (U.S.) (0.4 liters)
Model Year - 2010