Optional Card Exp-Dcp-Adl500 - gefran ADL500 Quick Start Up Manual, Specification And Installation

A.1.3 - Optional card EXP-DCP-ADL500
Optional expansion card (cod. S5DL434, for ADL550 only) for remote control through the DCP3 protocol for use in EFC
(Elevator Floor Control) mode or through the DCP4 protocol for use in EPC (Elevator Positioning Control) mode (in
preparation).
J2 DSUB 9-pin female cup connector
Pin
1 n.c.
2 n.c.
3 n.c.
4 n.c.
5 n.c.
6 DATA - (B)
7 n.c.
8 DATA + (A)
9 REF (GROUND)
For the connection reference should be made to the DCP specifications (see next screen).
The connection have no galvanic isolation!
Caution
Segnal
ADL500 • Quick installation guide - Specifications and connection
DATA + (A)
DATA - (B)
GND
5 4 3 2 1
9 8 7 6
89