Appendix; Optional Cards; Installation - gefran ADL500 Quick Start Up Manual, Specification And Installation

Appendix

A.1 - Optional cards
A.1.1 - Installation
Only one option card can be installed, either an EXP-IO1-ADL500 or an EXP-DCP-ADL500.
Use only the screws supplied with the option card.
Caution
1. Use a Phillips screwdriver (Ph2) to loosen the 4 M3 screws (2) and then remove the top cover (1);
2. Secure the optional board (3) by inserting the option board's J1 female connector onto the control board's J1
male connector;
3. Tighten down the 2 M3 screws supplied with the option board (4);
4. Replace the upper cover (1) and tighten down the 4 M3 screws (2).
2
ADL500 • Quick installation guide - Specifications and connection
1
4
3
87