Wireless Hand-Held Remote Control (Whhrc) - Will Burt Night Scan Powerlite Operating Instructions Manual

NIGHT SCAN POWERLITE, POWERLITE XTREME, AND POWERLITE HDT
OPERATING INSTRUCTIONS
Figure 5-7 PMRC Panel Cutout Dimensions
A loose wiring connector is shipped with the PMRC to allow cable routing in the vehicle. Once the
cable is routed, wire the connector and attach the connector to the back of the PMRC.
To wire the PMRC connector:
1. See the Wiring Diagrams provided in the Appendix.
2. Ensure power is properly disconnected from the system.
3. Connect the wires from the Control Cable to the supplied PMRC plug according to the wiring
diagram.
4. Plug the cable into the back of the PMRC.
5.6.3

Wireless Hand-Held Remote Control (WHHRC)

Refer to TP-5543301 for installation instructions for the WHHRC option.
PAGE 36 OF 98 TP-4723701-U
MAY 2021