Wiring Remote Control Cable To The Base Board - Will Burt Night Scan Powerlite Operating Instructions Manual

NIGHT SCAN POWERLITE, POWERLITE XTREME, AND POWERLITE HDT
OPERATING INSTRUCTIONS
5.7.1

Wiring Remote Control Cable to the Base Board

The Bulkhead Cable (or PMRC Control Cable) connects the bulkhead, Remote Control, and
Base Board.
3. Connect the wires from the Bulkhead Cable (or PMRC Control Cable) to the green J4
connector located on the top left of the Base Board ensuring the wires match the color strip
on the J4 connector. Connect the J4 connector to the Base Board.
PAGE 38 OF 98
Figure 5-9 Wiring J4
TP-4723701-U
MAY 2021