Installing Remote Control; Wired Hand Held Remote Control (Hhrc) - Will Burt Night Scan Chief Series Operating Instructions Manual

NIGHT SCAN CHIEF
OPERATING INSTRUCTIONS
Figure 5-3 Night Scan Chief Installation Dimensions (Bottom View) Inches [mm]
Model
Night Scan Chief 1.0
Night Scan Chief 1.8
Night Scan Chief 2.3
5.5

Installing Remote Control

This section provides information to install the remote control. Several options are available. Fol-
low the instructions appropriate for your system.
5.5.1

Wired Hand Held Remote Control (HHRC)

Go to section 5.5.2 to if you are installing the Panel Mount Remote Control (PMRC) or section
5.5.3 for the wireless control option. This section will describe how to install the Wired HHRC with
a bulkhead.
The bulkhead connector is provided to remotely install the connection point for the HHRC at the
operator control location. The operator station should be located where the operator has line-of-
sight to the mast operating space. The bulkhead and HHRC should be located in a protected, dry
location (the HHRC is IP54).
To attach the bulkhead:
PAGE 24 OF 80
Table 5-2 Installation Dimensions
Dimension A Value (from Figure 5-3)
44.283 inches [1124.8 mm]
40.130 inches [1019.3 mm]
46.190 inches [1173.2 mm]
TP-4602001-T
DECEMBER 2020