Device Maintenance - CAME XVP S Configuration Manual

ASSIGNING IMAGES
LOGO GALLERY
System
Date and Time
NODE TYPE
Network
USERS
SIP
Credentials
Access control
Device
Images and logos
Images and logos
Maintenance
Diagnostics

Device maintenance

INFO
INFO
System
Date and Time
Network
SIP
Credentials
Access control
Device
Images and logos
Maintenance Maintenance
Diagnostics
UPDATES
System
Date and Time
Network
SIP
Credentials
Access control
Device
Images and logos
Maintenance
Maintenance
Diagnostics
Immagini e Loghi
IMAGES GALLERY MAP GALLERY
Applica
Ricarica
Maintenance
Help
UPDATES CONFIGURATION...
MAIN SW VERSION
SW VERSION BUS.CONTROL
SW VERSION BLUETOOTH
Maintenance
Help
INFO UPDATES CONFIGURATION...
SELECT MODULE
Main module
MTMRFID module
FILE
Select fi le
❷
Aiuto Esci
You can select the TYPE of images to be assigned from APPEARANCE, GROUPS
ASSIGNING IMAGES
or USERS.
If APPEARANCE is selected, you can choose the image you want to use as the
logo and screensaver from those available in the logo gallery. Select the icon
next to the element you want to configure, followed by the pencil icon to edit the
image or the bin icon to remove it and restore the pre-defined image.
In the same way, if GROUPS is selected, and if the device has been programmed
for displaying groups, you can choose an image to assign to each group of
users. The image will be shown in the groups list.
If USERS is selected, again you can assign an image to the user, as well as a
map. The image will be shown in the list of users when searching for a user and
during a call. The map will be shown when the door is opened from the internal
receiver that was called.
Firmware version for the main module and the connected accessories.
Exit
Update the firmware for the connected devices.
Exit
❶ Press to choose which module to update.
❷ Select the update file.
Start the update.
❶
Upload