Network Settings - CAME XVP S Configuration Manual

Network settings

System
CONNECTIONS
MAC ADDRESS
Date and Time
Network
Network
MODE
SIP
Credentials
IP ADDRESS
Access control
Device
NETMASK
Images and logos
GATEWAY
Maintenance
Diagnostics
DNS
Configuring CAMEConnect (MASTER device only)
CONNECTIONS
System
Date and Time
KEYCODE
Network
Network
SIP
PROVIDER
Credentials
Access control
CONNECTION
Device
Enable
Images and logos
STATUS
Maintenance
Connected
Diagnostics
CONNECTIONS
Network
Help Exit
❶ Device MAC ADDRESS, cannot be edited.
CAMECONNECT
❷ Choose the type of addressing.
DHCP
❶
The device's IP address is assigned by the DHCP server.
DHCP server always assigns the same IP address to the device.
❷
STATIC
The device's IP address is assigned manually.
❸
❸ Enter the device's IP address.
❹
connected devices, in the case of a static IP.
❹ Specify the correct netmask, where different from the default setting.
❺ Specify the default gateway for your network.
❺
❻ Enter a valid DNS address for CAMEConnect connection (only for XVP configured as
MASTER).
❻
Press SAVE or RELOAD at the bottom of the page to save or reload previous data.
❼ Device keycode.
Network
Help Exit
❽ Supplier for the remote calling service (default: xip01.cameconnect.net).
CAMECONNECT
❾ Enable video-entry call VoIP remote control.
❿ Connection status.
Press SAVE or RELOAD at the bottom of the page to save or reload previous data.
❼
❽
❾
❿
If the device is configured as the master (serverless system), make sure that the
The device IP address must belong to the same subnet as the router and other